Jungheinrich ESE 220, Operating Instructions Manual

Page: 56 / 170

3.3 Adjusting the driver’s seat
CAUTION!
An unsecured driver's seat can cause injury
An unsecured driver's seat can slide out of its guide during travel, resulting in
accidents.
u The driver's seat must be locked in position.
u Do not adjust the driver’s seat while travelling.
Adjusting the driver’s seat
Procedure
• Sit down on the driver’s seat.
• Loosen the seat lock (54) and push it forward or backward to the desired position.
• Lock the seat in position again.
• Undo the backrest lock (56) and bring the backrest into its required position.
• Lock the backrest in position again.
• Set the seat cushioning to the required level by turning the adjusting wheel (55).
The driver's seat is now set in the correct position for the controls.
55
54
56
3.4 Adjusting the Floor-Plate Height
Procedure
• Sit down on the driver’s seat.
• Press and hold down on the floor plate height adjustment button (13).
The floor plate can now be adjusted.
56
04.19 en-GB