Jungheinrich ESE 220, Operating Instructions Manual

Page: 60 / 170

3.7 Parking the truck securely
WARNING!
An unsecured truck can cause accidents
Parking the truck on an incline, without the brakes applied or with a raised load or
load handler is dangerous and is strictly prohibited.
u Park the truck on a level surface. In special cases the truck may need to be
secured with wedges.
u Fully lower the load handler.
u
Select a place to park where no other people are at risk of injury from the lowered
load handler.
u If the brakes are not working, place wedges underneath the wheels of the truck to
prevent it from moving.
Parking the truck securely
Procedure
• Park the truck on a level surface.
• Fully lower the load handler (60):
• Press the lower button (51).
• Turn the drive wheel to the "straight-ahead" position.
• Switch off the truck. To do this:
• Turn the key in the key switch (6) anti-clockwise as far as it will go. Remove the
key from the key switch (6).
• For CanCode (8), press the O key (
o
).
• Press the red key on the ISM access module (
o
).
• Press the emergency disconnect switch (11).
The truck is parked.
60
51
6,8 11
60
04.19 en-GB