8.2 Troubleshooting
Removing a luminaire from a scene
Cause: a luminaire has not been disconnected from the mains when a scene was saved which
it is not supposed to belong to.
Reset the lamp and connect it to the transmitter again, see Chapter 4.2
Luminaire cannot be connected to transmitter, LEDs on transmitter flash red.
The luminaire is already part of another network.
Reset the luminaire, see chapter 4.5 and start another connection process, see
chapter 4.2.
The LED does not light up when a button is pressed.
Battery in the transmitter is empty.
Change the battery, see Inserting a battery.
8.3 Accessories
Cover kit 4-gang
Art. No. ..504TSA..
8.4 Conformity
Albrecht Jung GmbH & Co. KG hereby declares that the radio system type
Art. No. ZLLCD5004M / ZLLLS5004M / ZLLA5004M
corresponds to the directive 2014/53/EU. You can find the full article number on the device. The
complete text of the EU Declaration of Conformity is available under the Internet address:
www.jung.de/ce
8.5 Warranty
The warranty follows about the specialty store in between the legal framework as provided for
by law.
ALBRECHT JUNG GMBH & CO. KG
Volmestraße 1
58579 Schalksmühle
GERMANY
Telefon: +49 2355 806-0
Telefax: +49 2355 806-204
[email protected]
www.jung.de
17/17
32596203
J0082596203
23.05.2016
ZigBee radio transmitter module 4-gang
