The luminaires saved in the buffer memory light up shortly.
o
Within 2 minutes, after the last button has been pressed, transfer the buffer memory to the
desired transmitter, see chapter 5.5.
5.3 Accepting connections from another transmitter
Figure 18
o
Switch on the service functions, see chapter 5.1.
o
On the receiving transmitter, press the
ƍ
and
Ƌ
buttons simultaneously until the
LEDs flash green.
o
Start a connection process on the transmitter to be read out, see Chapter 4.2.
LEDs light up green for 3 seconds. The connections from the transmitter to be read have
been saved in the buffer memory.
LEDs flash red quickly for 3 seconds. The connections from the transmitter to be read have
not been saved in the buffer memory.
o
As an option, press the
Ɔ
button shortly in order to show all luminaires in the buffer
memory.
The luminaires saved in the buffer memory light up shortly.
o
Within 2 minutes, after the last button has been pressed, transfer the buffer memory to the
desired transmitter, see chapter 5.5.
5.4 Copy the transmitter connections that are saved in the transmitter to the buffer
memory
Figure 19
13/17
32596203
J0082596203
23.05.2016
ZigBee radio transmitter module 4-gang
