4 Commissioning
4.1 Basic commissioning procedure
Preconditions:
During commissioning, the respective devices must have a distance of 10 to 50 cm to each
other.
Each device can only be part of one network.
The luminaire shall be operated using a Philips Hue Bridge or an Osram Lightify Gateway
and transmitters.
o
Commission the luminaire with a bridge or gateway.
o
Add the transmitter to the network of the bridge or gateway.
i
If the transmitter already belongs to a network, reset the transmitter beforehand, see
Chapter 4.6.
i
The procedure depends on the app used and may deviate from the procedure described
herein. Up-to-date information can be found on our website.
o
Open the network of the bridge or gateway.
Philips Hue Bridge
Osram Lightify Gateway
Start Philips Hue app.
Start Osram Lightify app.
Select "Settings".
Select "Devices".
Select "My lamps"
Press "
+
".
Select "Connect new lights".
Select "Add lights/plugs".
Select "Automatic search".
Press "
→
".
o
Press the
Ƌ
and
ƍ
buttons on the new transmitter simultaneously until the LEDs
flash green.
i
After approx. 10 seconds the transmitter searches for an open network.
LEDs light up green for 3 seconds. The transmitter has joined the network of the bridge or
gateway.
LEDs flash red quickly for 10 seconds. The transmitter has not joined the network.
o
Connect the transmitter to a luminaire, see Chapter 4.2.
The luminaire shall exclusively be operated using a transmitter without connection to a
Philips Hue Bridge or Osram Lightify Gateway.
The luminaire has default settings.
o
Connect the luminaire to a transmitter, see chapter 4.2.
or the luminaire belongs to another network.
o
Reset luminaire, see chapter 4.5.
o
Connect the luminaire to a transmitter, see chapter 4.2.
i
For additional luminaires, repeat the corresponding actions.
The luminaire should be operated with several transmitters without a connection to a
Philips Hue Bridge or Osram Lightify Gateway
Precondition:
The luminaire is already connected to a transmitter, see chapter 4.2.
o
Add a new transmitter to the network, see chapter 4.3.
o
Connect the luminaire to the new transmitter, see chapter 4.2.
7/17
32596203
J0082596203
23.05.2016
ZigBee radio transmitter module 4-gang
