![background image](http://html1.mh-extra.com/html/jung/zlla5004m/zlla5004m_operating-instructions-manual_2031845012.webp)
Figure 16
o
Switch on the service functions. To do so, shortly press the
Ƌ
and
ƌ
buttons.
LEDs light up red. The service functions have been switched on.
o
Save luminaires or connections in the buffer memory of the transmitter, see chapter 5.2,
5.3 or 5.4.
o
Pass on luminaires or connections to a transmitter, see chapter 5.5.
i
By pressing the above buttons again or after 2 minutes without action the service functions
are switched off and the buffer memory is deleted.
5.2 Seizing selected luminaires
Figure 17
o
Switch on the service functions, see chapter 5.1.
o
Press the
Ɔ
and
ƌ
buttons simultaneously until the LEDs flash green.
LEDs light up green for 3 seconds: The connection to the luminaire is saved in the buffer
memory. The transmitter waits for further connections.
LEDs flash red quickly for 3 seconds: The connection to the luminaire has not been saved
in the buffer memory. The transmitter waits for further connections.
o
As an option, save further connections in the buffer memory. To do so repeat the previous
step.
o
As an option, press the
Ɔ
button shortly in order to show all luminaires in the buffer
memory.
12/17
32596203
J0082596203
23.05.2016
ZigBee radio transmitter module 4-gang