Figure 3
o
Press the corresponding scene button
Ƈ
briefly until
ƌ
.
The luminaires that belong to that scene will switch to the saved values.
2.3 Saving scenes
i
If the scene shall be recalled from several transmitters, it must be saved at each transmitter
separately.
o
Luminaires that shall not be part of the scene must be disconnected prior to saving.
o
Set the luminaires to the desired values, see chapter 3.
Figure 4
o
Press the corresponding scene button
Ƈ
to
ƌ
for longer than 4 seconds.
The LED on the respective side of the button lights up green for 3 seconds. The scene has
been saved on the selected button.
3/17
32596203
J0082596203
23.05.2016
ZigBee radio transmitter module 4-gang
