4.7 Resetting the transmitter to the default setting
i
All connections to luminaires will be disconnected and the allocation to a network will be
deleted.
Figure 15
o
Keep the
Ɖ
and
Ɗ
buttons pressed.
After approx. 10 seconds, the LEDs flash green.
o
Release the
Ɖ
and
Ɗ
buttons and press the
Ɔ
button within 10 seconds.
Transmitter will be reset to the default settings. After completion, the LEDs light up green
for 3 seconds.
5 Service functions
5.1 Switching on the service functions
The service functions can exclusively be used with our transmitters. They enable you for
example to connect fixed wall transmitters to luminaires when these cannot be brought into
connection range to each other or to pass on existing connections from one transmitter to
another.
Precondition:
To be able to use the service functions (switch them on) the transmitter must be part of the
network, see chapter 4.3 and at least one luminaire must be switched on.
o
Keep the transmitter within a range of 10 to 50 cm from the luminaire or transmitter.
11/17
32596203
J0082596203
23.05.2016
ZigBee radio transmitter module 4-gang
