LB management
eNet radio centre plate
Parameters
Setting options, Basic
setting
Explanations
function brightness", then the system dims to the
set minimum brightness when the hotel function
is activated.
Brightness hotel
function
0.4 ... 100 %
Basic setting: 20 %
Brightness to which the light is switched when the
hotel function is activated, if switched off. The
percentage value refers to the maximum bright-
ness.
Channel settings "3-wire extension"
Parameters
Setting options, Basic
setting
Explanations
Switch-on delay
0 s … 24 h
Basic setting: 0 s
The load switches on after a delay. Repeated
switch-on commands restart the delay time. If the
load has not yet been switched on due to the
delay when a switch-off command comes, then
the load will remain off.
Switch-off delay
0 s … 24 h
Basic setting: 0 s
The load switches off after a delay. Repeated
switch-off commands restart the delay time. If the
load has not yet been switched off due to the
delay when a switch-on command comes, then
the load will remain on.
Extended channel settings "3-wire extension"
Parameters
Setting options, Basic
setting
Explanations
Operating mode
Normal operation
Continuous on
Continuous off
Basic setting: Normal
Operation
See Device and channels.
Manual commis-
sioning
On, Off
Basic setting: On
Blocks manual commissioning for the device
channel. In the "Off" setting, the device cannot be
reset to the factory setting.
Local Operation
On, Off
Basic setting: On
Blocks the output for operation using the button.
Channel settings "Venetian blind"
Parameters
Setting options, Basic
setting
Explanations
Venetian blind
ventilation posi-
tion
0 ... 100 %
Basic setting: 0 %
Position, in which the curtain stops as a ventila-
tion position when moving down.
Slats ventilation
position
0 ... 100 %
Basic setting: 0 %
Slat position set by a Venetian blind in the ventil-
ation position.
Operating hours,
Up
0...65535
Basic setting: Current
value
The time is counted during which the load is
switched on (relay contact closed). This para-
meter can be reset to "0", for example after ex-
changing the load.
18 / 29
32597903
07.08.2019
J0082597903
