LB management
eNet radio centre plate
Information window
During channel selection in the Information window, the following settings can be made or val-
ues displayed.
"Switching"
Display value
Explanations
Load state
The load can be switched on or off.
Restraint
Display of forced position status.
Local disabling function
Shows whether the disabling function has been activated on the
attachment
Operating hours
Display of the operating hours since the last restart in the Settings
window.
"Dimming"
Display value
Explanations
Dim brightness value
The load can be dimmed using the slider or a brightness value
entry. Only when "Function" is set to "Light (Dimming)".
Load state
The load can be switched on or off.
Restraint
Display of forced position status.
Local disabling function
Shows whether the disabling function has been activated on the
attachment
Operating hours
Display of the operating hours since the last restart in the Settings
window.
"Venetian blind"
Display value
Explanations
Position value, venetian
blind
The position value of the Venetian blind can be changed.
Position value, slat
The position value of the slat can be changed.
Restraint
Display of forced position status.
Lock-out protection
Display of the lock-out protection status
Operating hours UP
Display of the operating hours in the UP direction since the last
restart in the Settings window.
Operating hours DOWN
Display of the operating hours in the DOWN direction since the
last restart in the Settings window.
"2-wire switching", "Swi fan"
Display value
Explanations
Load state
The load can be switched on or off.
Restraint
Display of forced position status.
Local disabling function
Shows whether the disabling function has been activated on the
attachment
Operating hours
Display of the operating hours since the last restart in the Settings
window.
28 / 29
32597903
07.08.2019
J0082597903
