LB management
eNet radio centre plate
3
Intended use
–
Manual, radio- and time-controlled operation of e.g. Venetian blinds, shutters, awnings,
lighting or fans
–
Transmitter for radio communication of switching, dimming and blind movement com-
mands
–
Operation of switching, dimming or Venetian blind insert or 3-wire extension from LB man-
agement
When operating with the eNet Server, operation and signalling could vary from what is de-
scribed here.
4
Product characteristics
–
2 switching times can be saved, which are repeated in a 24-hour cycle
–
Disabling function
–
Status feedback to radio transmitter
–
Status indication with LED
–
Night mode
–
Evaluation of extension inputs
Functions in combination with Venetian blind insert
–
Positioning of the blind/shutter via scene request
–
Position for sun protection and twilight
–
Running time and ventilation position of the blind/shutter can be saved
Functions in combination with light insert
–
Scene operation possible
–
Switch-on brightness can be saved permanently when combined with flush-mounted in-
serts for dimming
Can be set with eNet Server from version 2.2 (depending on application)
–
Repeater function
–
Slat change-over time/fabric-stretching time
–
Change-over-time for direction change
–
Running direction invertible
–
Operation locks
–
Deactivating extension evaluation
–
Position for sun protection, twilight, lock-out protection and wind alarm
–
Maximum brightness
–
Minimum brightness
–
Dimming speed
–
Switch-on delay / switch-off delay
–
Dim up/dim down ramp
–
Switch-off warning
–
Continuous on, Continuous off
–
Hotel function
–
Run-on time
–
Light control
Supplementary functions with eNet Server:
–
Fully encrypted radio transmission (AES-CCM)
–
Update of the device software
–
Reading of error memory
Behaviour after mains voltage return
–
The switching times saved in memory operation have been deleted.
2 / 29
32597903
07.08.2019
J0082597903
