LB management
eNet radio centre plate
Parameters
Setting options, Basic
setting
Explanations
Manual saving of
the scene values
On, Off
Basic setting: On
Disables the saving of the current actuator state
(On/Off) as scene value in an actuator for a com-
mand via a transmitter.
Switch-off warn-
ing
On, Off
Basic setting: Off
If the switch-off warning is active, the light is not
switched off directly. The light briefly goes off 30,
20 and 10 seconds before permanent switch-off.
During the switch-off warning, a switch-on com-
mand activates direct switch-on. It is not possible
to terminate the time using a switch-off com-
mand.
Priority, lock-out
protection
0...4
Basic setting: 1
Specifies the priority for recalling and removing a
scene of type Lock-out protection for the channel.
Activate lock-out
protection switch-
ing state
On, Off
Basic setting: Off
Defines the behaviour of the output on activating
the lock-out protection.
Deactivate lock-
out protection
switching state
On, Off
Basic setting: Off
Defines the behaviour of the output on deactivat-
ing the lock-out protection. Only visible when the
priority for the lock-out protection is 0.
Priority, restraint
0...4
Basic setting: 2
Specifies the priority for recalling and removing a
scene of type Restraint for the channel.
Activate forced
operation switch-
ing state
On, Off
Basic setting: On
Defines the behaviour of the output on activating
the forced operation.
Deactivate forced
operation switch-
ing state
On, Off
Basic setting: Off
Defines the behaviour of the output on deactivat-
ing the forced operation. Only visible when the
priority for the forced operation is 0.
Priority, wind
alarm
0...4
Basic setting: 3
Specifies the priority for recalling and removing a
scene of type Wind alarm for the channel.
Activate wind
alarm switching
state
On, Off
Basic setting: Off
Defines the behaviour of the output on activating
the wind alarm.
Deactivate wind
alarm switching
state
On, Off
Basic setting: Off
Defines the behaviour of the output on deactivat-
ing the wind alarm. Only visible when the priority
for the wind alarm is 0.
Priority, sun pro-
tection
0...4
Basic setting: 0
Specifies the priority for recalling and removing a
scene of type Sun protection for the channel.
Activate sun pro-
tection switching
state
On, Off
Basic setting: On
Defines the behaviour of the output on deactivat-
ing the sun protection. Only visible when the pri-
ority for the sun protection is 0.
Deactivate sun
protection switch-
ing state
On, Off
Basic setting: Off
Defines the behaviour of the output on deactivat-
ing the sun protection. Only visible when the pri-
ority for the sun protection is 0.
Priority, twilight
0...4
Basic setting: 0
Specifies the priority for recalling and removing a
scene of type Twilight for the channel.
Activate twilight
switching state
On, Off
Basic setting: On
Defines the behaviour of the output on activating
the twilight function.
13 / 29
32597903
07.08.2019
J0082597903
