JUMO 202610.0, Operating Instructions Manual, Page: 26 / 68

6 Assembly
26
6.6 Support column with pedastal base, arm,
chain and weather protection canopy
Application This accessory is intended for installation at the edge of a basin. The
dTRANS O2 01 oxygen transmitter is installed in a suspension fitting. Different
immersion depths and distances from the edge of the basin are facilitated by
the arm and the chain.
The weather protection canopy protects the terminal box or the operating unit
from the effects of the weather.
The pipe mounting assembly can be used to mount the terminal box or the
operating unit on a pipe (diameter 30 — 50 mm).
The following points should be noted at the design stage:
- The fitting must be easily accessible, to allow regular maintenance and
cleaning of the transmitter or the fitting itself.
- The fitting (and with it the transmitter) must not strike the side of the basin
as a result of pendular movements.
- The operating unit must not be exposed to direct sunlight.
- The suitability of the materials of the fitting and the transmitter (e.g.
chemical compatibility) must be checked by the system designer.
Support column
with pedestal
base, arm,
chain Material: Column stainless steel
Pedestal base die-cast aluminium
Arm stainless steel
Chain stainless steel
Universal joint die-cast aluminium
Sales No. 20/00398163
Pipe mounting
assembly Material: stainless steel
Sales No. 20/00398162
Weather
protection
canopy Material: stainless steel
Sales No. 20/00398161
Suspension
fitting Material: see previous section
Sales No. 20/00398143
or
20/00398144
see diagram on next page