JUMO 202610.0, Operating Instructions Manual, Page: 18 / 68

6 Assembly
18
6.2 Flow-through fittings
Application Flow-through fittings are used to accommodate the dTRANS O2 01 oxygen
transmitter. The fittings are installed directly in the pipeline conveying the
liquid, or in the bypass. The special construction of the fitting ensures a
correct flow past the sensor, thereby avoiding measurement errors.
The following points should be noted when planning the pipework layout:
- The fitting must be easily accessible, to allow regular maintenance and
cleaning of the transmitter or the fitting itself.
- Bypass measurements are recommended. Shut-off valves should be
provided so that the transmitter can be removed.
- Where systems are subject to temperature and / or pressure loading, the
fitting and the transmitter must meet the requirements.
The suitability of the materials of the fitting and the transmitter (e.g. chemical
compatibility) must be checked by the system designer.
Flow-through
fitting, angled
seat Material: PVC
Permissible temperature: +5 to +50°C
Safe pressure:
up to 1 bar
Connection: solvent weld sockets
Process connection: T-piece DN50, 45°
Sales No. 20/00398137