JUMO 202610.0, Operating Instructions Manual, Page: 22 / 68

6 Assembly
22
6.4 Suspension fittings
Application Suspension fittings are used to accommodate the dTRANS O2 01 oxygen
transmitter. The fittings are primarily employed for measurement in open
basins. The fitting can be positioned far from the edge of the basin,
suspended from a chain by the shackle, for example. Different immersion
depths are facilitated by various immersion lengths.
The following points should be noted at the design stage:
- The fitting must be easily accessible, to allow regular maintenance and
cleaning of the transmitter or the fitting itself.
- The fitting (and with it the transmitter) must not strike the side of the basin
as a result of pendular movements.
- The suitability of the materials of the fitting and the transmitter (e.g.
chemical compatibility) must be checked by the system designer.
Suspension
fitting Material: immersion tube PVC
stainless steel shackle
Permissible temperature: +5 to +50°C
Safe pressure:
up to 1 bar
Cable gland: Pg11
Protection: IP65 EN 60 529
Immersion length: 150 mm
Sales No. 20/00398148
Immersion length: 500 mm
Sales No. 20/00398143
Immersion length: 1500 mm
Sales No. 20/00398144
see diagrams on the following pages
n