JUMO 202610.0, Operating Instructions Manual, Page: 20 / 68

6 Assembly
20
6.3 Immersion fittings
Application Immersion fittings are used to accommodate the dTRANS O2 01 oxygen
transmitter. The fittings are installed in open containers or sluices using the
pipe clips supplied. Different immersion depths are facilitated by various
immersion lengths.
The following points should be noted at the design stage:
- The fitting must be easily accessible, to allow regular maintenance and
cleaning of the transmitter or the fitting itself.
- The suitability of the materials of the fitting and the transmitter (e.g.
chemical compatibility) must be checked by the system designer.
Immersion
fitting Material: immersion tube PVC
pipe clip PP
Permissible temperature: +5 to +50°C
Safe pressure:
up to 1 bar
Cable gland: Pg11
Protection: IP65 EN 60 529
Immersion length: 500 mm
Sales No. 20/00398131
Immersion length: 1500 mm
Sales No. 20/00398135
see diagram on next page