JUKI IP-310/ACF-172-1790, Instruction Manual

Page: 121 / 142

− 120 −
Error
code
Description of error
How to
recover
Place of
recovery
E10 When sewing counter set value is smaller than the
number of times of sewing of the sewing pattern
which is selected at present.
Possible to
re-start after
reset.
ACF data input
screen
E Carriage movable range over error, left
Feed amount of sewing pattern is over the movable
range of carriage (left side).
set the jump feed amount and sewing length so that
the left traveling amount of carriage is within 2 mm.
Possible to
re-start after
reset.
ACF data input
screen
E Carriage movable range over error (right)
Feed amount of sewing pattern is over the movable
range of carriage (right side).
Set the jump feed amount and sewing length so that
the right traveling amount of carriage is within 10 mm.
Possible to
re-start after
reset.
ACF data input
screen
E Eyelet knife length error
When the shape is not formed since the eyelet knife
length is too short in case of eyelet shape.
Possible to
re-start after
reset.
Sewing data
input screen
E Eyelet shape length error
Eyelet shape length is too short to form the shape in
case of eyelet shape.
Possible to
re-start after
reset.
Sewing data
input screen
E Flow bar-tacking compensation error
When bar-tacking length is too short to form the shape
in case of flow bar-tacking shape.
Possible to
re-start after
reset.
Sewing data
input screen
E Knife size error (at the time of plural motions of knife)
When knife size is larger than cloth cutting knife size.
Possible to
re-start after
reset.
Sewing data
input screen
E2 Presser size over of basting
When stitching data of basting exceeds presser
size.
Possible to
re-start after
reset.
Sewing data
input screen
E3 Presser size over of tie stitching at sewing end
When stitching data of tie stitching at sewing end
exceeds presser size.
Possible to
re-start after
reset.
Sewing data
input screen