JUKI IP-310/ACF-172-1790, Instruction Manual

Page: 47 / 142

− 46 −
2-7-2. Sewing data list
Sewing data are those that can be inputted to 99 LBH patterns from LBH pattern 1 to 99 and can be inputted
to each LBH pattern.
The sewing machine has been set in the state that the data which is necessary to set "With/ without edit"
cannot be set at the time of your purchase. Change over the function to "With edit" if necessary for use.
→
Refer to 2-10. Setting procedure of sewing data with/without edit,p.60 .
(Remarks)
※1 : Displayed according to the shape.
※2 : Displayed when it is set to with edit.
Refer to 2-10. Setting procedure of sewing data with/without edit,p.60 .
※3 : Displayed when the function is selected.
No. Item Setting range Edit unit Remarks
Sewing shape
This item selects the shape from among the sewing shapes
of 30 different kinds which the sewing machine has.
→
Refer to 2-6. SEWING SHAPE LIST, p.43 .
1
〜
30
※ Only 12 kinds of standard sewing shapes can be
selected at the time of your purchase. When increasing
the kinds of shapes, perform setting of
Sewing
shape selection level of memory switch data.
→
Refer to 2-17-2. Memory switch list, p.80 .
1 to 30 1 ---
Cloth cut length
This item sets the length of cloth that is cut by
cloth cutting knife. However, in case of bar-
tack shape (Nos. 27, 28, 29 and 30 of S01),
sewing length is set.
3.0 to 120.0 0.1mm ---
By making effective Function of plural motions of
cloth cutting knife of memory switch data, make the plural
motions of knife by the knife size set in the item
Cloth cutting knife size, and the sewing product is cut.
→
Refer to 2-17-2. Memory switch list, p.80 .
Knife groove width, right
This item sets the clearance between cloth
cutting knife and right parallel section.
-2.00 to 2.00 0.05mm ---