JUKI IP-310/ACF-172-1790, Instruction Manual

Page: 48 / 142

− −
No. Item Setting range Edit unit Remarks
Knife groove width, left
This item sets the clearance between cloth
cutting knife and left parallel section.
-.00 to .00 0.0mm ---
Overedging width, left
This item sets the overedging width of left
parallel section.
0.10 to .00 0.0mm ---
Ratio of right and left shapes
This item sets enlargement/reduction ratio of
right side shape making the knife position as
the center.
0 to 10 % ---
Pitch at parallel section
This item sets sewing pitch of left and right
parallel sections.
0.00 to
2.00
0.02mm ---
2nd bar-tacking length
This item sets length of bar-tacking on the front
side.
0.2 to .0 0.mm ---
1st bar-tacking length
This item sets length of bar-tacking on the rear
side.
0.2 to .0 0.mm ---
Compensation of bar-tacking width, right
This item adjusts left side outer shape of bar-
tacking section in terms of overedging section.
Both st and nd bar-tacking can be
compensated.
-.00 to .00 0.0mm ---
Compensation of bar-tacking width, left
This item adjusts left side outer shape of bar-
tacking in terms of overedging section.
-.00 to .00 0.0mm ---
Square
type,
bottom Straight
bar-tack,
bottom Flow,
bottom
Square
type, top
Straight
bar-tack,
bottom Square
type, top Square
type,
bottom