JUKI IP-310/ACF-172-1790 Instruction Manual Download

Page: 11 / 142

− 10 −

Button and display

Description

SEWING ORDER display

Sewing order of the sewing data displayed on the right-hand side is

displayed.

PATTERN BUTTONHOLE No.

INPUT button

LBH sewing data No. registered to ACF pattern being selected at present

is displayed on this button and when this button is pressed, LBH sewing

data No. can be changed.

ACF PATTERN NAME display

Name registered to ACF pattern No. being selected is displayed.

→

Refer to

1-11. Naming the pattern,p.30

ACF MODE AND LBH MODE

CHANGEOVER button

When this button is pressed down, LBH data input screen is displayed and

operation or setting of the single unit of the sewing machine is possible.

→

Refer to

2. OPERATION OF THE SINGLE UNIT OF SEWING

MACHINE AND SETTING PROCEDURE (LBH MODE),p.31

JUMP FEED AMOUNT INPUT

button

Inputted jump feed amount is displayed on the button. In addition, when

the button is pressed down, the jump feed amount input screen is

displayed and edit of data can be performed. This button is displayed only

when with/without jump feed input selection of memory switch data (level
)

is ON.

→

Refer to

2-17-2. Memory switch data list,p.80

FEED AMOUNT INPUT button

When this button is pressed down, the feed amount input screen is

displayed and edit of the data can be performed.

TURN PAGE button

displayed only when or more of the sewing patterns are registered and it

is possible to observe the sewing data not displayed on the sewing screen.

Summary of Contents for IP-310/ACF-172-1790















































































































































Search results

Summary of Contents for IP-310/ACF-172-1790

Reviews:

Related manuals for IP-310/ACF-172-1790

Brands by name

Popular brands

JUKI IP-310/ACF-172-1790, Instruction Manual

Search results

Summary of Contents for IP-310/ACF-172-1790

Reviews:

Related manuals for IP-310/ACF-172-1790

Brands by name

Popular brands