JUKI IP-310/ACF-172-1790, Instruction Manual

Page: 124 / 142

− 123 −
エエエエエ
エ
エエエエエ エエエエ エエエエ
E02 エエエエエエエエ
エエエエエエエエエエエエエエエエエ
エエOFF
E03 エエエエエエエエエエ
エエエエエエエエエエエエエエエエエエエエエ±1エエエエエエエエエエ
エ
エエOFF
E0 エエエエエエエエエ
エエエエエエエエエエエエエエエエエエエエ±1エエエエエエエエエエエ
エエOFF
E0 エエエエエエエエエエエエエエエエエエエエエエ
エエエエエエエエエエエエエエエエエエエ℃エエエエエエエエ
エエOFF
E0 エエエエエエエエエエエエエ
エエエエエエエエエエエエエエエエエエエエエエエエエ
エエOFF
E0 エエエエエエエエエエエエエ
エエエエエエエエエエエエエエエエエエエエエエエエエ
エエOFF
E0 エエエエエエエエエエエエエエ
エエエエエエエエエエエエエエエエエエエエエエエエエ
エエOFF
E10 エエエエエエエエエエエエ
エエエエエエエエエエエエエエエエエエエエエエエエエ
エエOFF
Error
code
Description of error
How to
recover
Place of
recovery
E02 Overcurrent of main shaft motor
When current flows excessively to sewing machine
motor.
Turn OFF the
power.
E03 Abnormality of stepping motor power
When stepping motor power of servo control p.c.b.
fluctuates ±1% or more.
Turn OFF the
power.
E0 Abnormality of solenoid power
When solenoid power of servo control p.c.b. fluctuates
± 1% or more.
Turn OFF the
power.
E0 Abnormality of temperature of heat sink for servo
control p.c.b.
When temperature of heat sink of servo control p.c.b.
is °C or more.
Turn OFF the
power.
E0 Zigzag width motor origin retrieval error
When origin sensor signal is not inputted at the time of
origin retrieval motion.
Turn OFF the
power.
E0 Y-feed motor origin retrieval error
When origin sensor signal is not inputted at the time of
origin retrieval motion.
Turn OFF the
power.
E0 Needle thread trimmer motor origin retrieval error
When origin sensor signal is not inputted at the time of
origin retrieval motion.
Turn OFF the
power.
E10 Presser motor origin retrieval error
When origin sensor signal is not inputted at the time of
origin retrieval motion.
Turn OFF the
power.