− 1 −
1-6. Winding bobbin thread
1
Set the bobbin.
Fit a bobbin fully onto the bobbin winder shaft.
Then push the bobbin thread guide in the
direction of the arrow mark.
4
Stop the sewing machine.
Press STOP button
(B) and the sewing
machine stops and returns to the normal mode.
In addition, the sewing machine stops even when
the temporary stop switch is pressed. However,
the error screen is displayed to inform that the
temporary stop switch is pressed.
→
Refer to
1-5. Performing re-sewing,p.15
.
and
2-4. Performing re-sewing under LBH
mode,p.39
.
1. Remove needle thread from the thread
take-up to needle before winding
bobbin thread.
2. When winding the bobbin thread in
the state that sewing is not performed,
remove the needle thread from the
thread path of thread take-up and
remove the bobbin from the hook.
2
Display the bobbin winding screen.
Press BOBBIN WINDER button
(A) in
the ACF data input screen (pink), the automatic
sewing screen or manual sewing screen (green)
and the bobbin winding screen is displayed.
3
Start bobbin winding.
When the switch set to the start switch is pressed
with the knee switch or hand switch, the sewing
machine rotates and starts winding bobbin thread.
A
C
Summary of Contents for IP-310/ACF-172-1790
Page 1: ...ENGLISH IP 310 ACF 172 1790 INSTRUCTION MANUAL ...
Page 12: ... 11 1 3 2 Automatic sewing screen B C D E O H G M I A L P J K N F ...
Page 35: ... 34 2 1 2 Independent sewing screen A D B C E G M I J L H K F ...
Page 69: ... 68 2 14 2 LBH continuous stitching sewing screen A H B D C E F Q R I G S T U J K L M N O P V ...
