JUKI IP-310/ACF-172-1790, Instruction Manual

Page: 36 / 142

− 35 −
Button and display Description
A SEWING MACHINE START
button
Sewing of the selected LBH pattern is started.
B LBH PATTERN DATA
AUTOMATIC TURN button (to
return)
LBH pattern data which is used in ACF pattern data being selected at
present is automatically turned.
C ACF PATTERN AND SEWING
ORDER display
ACF pattern No. being selected and sewing order are displayed. LBH
pattern Nos. which are set in the displayed sewing order is in the state of
selection.
D KNIFE CANCEL button Every time the button is pressed, dropping of knife and non-dropping of knife
can be changed over alternately.
E LBH PATTERN DATA
AUTOMATIC TURN button (to
advance)
LBH pattern data which is used in ACF pattern data being selected at
present is automatically turned.
F PRESSER DOWN button Presser can be lowered and the knife down screen is displayed.
To raise the presser, press the presser up button displayed in the presser
down screen.
＊
When performing threading in this state, turn OFF the power before
performing.
G BOBBIN WINDER button Bobbin thread can be wound.
→
Refer to 1-6. Winding bobbin thread,p.17 .
H STEP STITCHING button When the button is pressed, the screen of step stitching to check needle
entry point and to perform re-sewing is displayed.
→ Refer to 2-4. Performing re-sewing under LBH mode,p.39 .
I NEEDLE THREAD TENSION
button
Needle thread tension which is set to the pattern data during sewing is
displayed, and when the button is pressed, the needle thread tension
change screen is displayed.
→ Refer to 2-9. Changing needle thread tension,p.58 .
J COUNTER VALUE CHANGE
button
Existing counter value is displayed on the button, and when the button is
pressed, the counter value change screen is displayed.
→ Refer to 1-7. Using counter,p.18 .
K COUNTER CHANGEOVER
button
Display of sewing counter/No. of pcs. counter can be changed over.
→ Refer to 1-7. Using counter,p.18 .
L CHANGEOVER OF ACF MODE
AND LBH MODE button
When the button is pressed, the ACF automatic sewing screen is displayed
and automatic sewing can be performed.
M SEWING SPEED variable
resistor
Number of rotation of sewing machine can be changed.