manualshive.com logo in svg

JUKI IP-310/ACF-172-1790, Instruction Manual

Share
Download
JUKI IP-310/ACF-172-1790 Instruction Manual Download Page 98

−  −

3-2-1. Observing the maintenance and inspection information

1

 Display the information screen.

  When information key 

 (A) of the switch 

seat section is pressed in the data input screen, 
the information screen is displayed.

2

 Display  the  maintenance  and  inspection 

information screen.

  Press maintenance and inspection 

informationscreen display button 

 (B) in the 

information screen.

  Information on the following three items is 

displayed in the maintenance and inspection 
information screen.

  • Needle replacement (,000 stitches) : 

  • Cleaning time (hour) : 

  • Oil replacement time (hour) : 

  The interval to inform of the inspection for 

each item in button (C) is displayed at (D), and 
remaining time up to the replacement is displayed 
at (E). In addition, remaining time up to the 
replacement can be cleared.

A

B

E

D
C

F

Summary of Contents for IP-310/ACF-172-1790















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands