JUKI IP-310/ACF-172-1790, Instruction Manual

Page: 122 / 142

− 121 −
Error
code
Description of error
How to
recover
Place of
recovery
E Presser size over of tie stitching at sewing start
When stitching data of tie stitching at sewing start
exceeds presser size.
Possible to
re-start after
reset.
Sewing data
input screen
E Presser size error (Width direction : right only)
When stitching data exceeds the size of right only of
width direction of presser.
Possible to
re-start after
reset.
Sewing data
input screen
E Presser size error (Width direction : left only)
When stitching data exceeds the size of left only of
width direction of presser.
Possible to
re-start after
reset.
Sewing data
input screen
E Presser size error (Length direction : front)
When stitching data exceeds the size of front of
length direction of presser.
Possible to
re-start after
reset.
Sewing data
input screen
E Presser size error (Width direction : right and left)
When stitching data exceeds the size of both right and
left of width direction of presser.
Possible to
re-start after
reset.
Sewing data
input screen
E Presser size error (Length direction : rear)
When stitching data exceeds the size of rear of length
direction of presser.
Possible to
re-start after
reset.
Sewing data
input screen
E03 Panel is connected to the machine other than
supposed. (Machine type error)
When machine type code of system is improper in
case of initial communication.
Possible
to rewrite
program after
pressing down
communication
switch.
Communication
screen
E0 Nonagreement of system version
When version of system software is improper in case
of initial communication.
Possible
to rewrite
program after
pressing down
communication
switch.
Communication
screen