JUKI AP-874/IP-420, Instruction Manual

Page: 82 / 120

– 78 –
Button and display Description
A AUTOMATIC/STEP setting
display Every time this button is pressed, the mode is changed over in the order of
" → ".
→ Refer to “II-2-10. Setting the AUTOMATIC/STEP” p.43 .
B
MATERIAL RELEASE
button The material presser of the stacker opens to allow the sewing product in the
stacker to be taken out.
→ Refer to “II-2-14. Stacker operation (taking out the material)” p.49 .
C
SETTING POSITION
CHANGE button The setting position change screen is displayed.
→ Refer to “II-2-11. How to change the setting position” p.44 .
D
PRESSER DOWN button The presser arm, presser plate presser plunger come down, and the presser
down screen is displayed.
→ Refer to “II-2-13. Lowering the presser” p.48 .
E
PATTERN NO./TYPE
display The pattern No. and type of the pattern which is being selected are displayed.
F SEWING SHAPE display The sewing shape of the currently selected pattern is displayed.
G NUMBER OF STITCHES
display The number of stitches for the currently selected pattern is displayed.
H X ACTUAL SIZE VALUE
display The actual X size value of the sewing shape which is being selected is displayed.
I
Y ACTUAL SIZE VALUE
display The actual Y size value of the sewing shape which is being selected is displayed.
J PATTERN NAME display The name of the currently selected pattern is displayed.
K COUNTER VALUE
CHANGE button The counter value is changed using PLUS button R or MINUS button S . The
counter value is indicated on the button. When the button is pressed, P is
displayed to allow the counter value to be changed.
The current counter value is indicated on edit data display
Q .
→ Refer to "II-2-15. Using counter" p.50 .
L
CLEAR button The counter value is cleared.
* This button is displayed only when COUNTER VALUE CHANGE button K is
being selected.
M
SHAPE CHECK button The shape of the pattern which is being selected is checked using PLUS button
R or MINUS button S . The current number of stitches is indicated on edit data
display Q .
During the pattern shape checking, the SEWING SHAPE display F is shown
with the current point (pink circle). To finish the pattern shape checking, press
the SHAPE CHECK button again.
N RETURN TO ORIGIN
button This button is used to return the presser plate to the start point of sewing at the
time of the temporary stop or pattern shape checking.
O
NEEDLE THREAD
TENSION SETTING
button The current needle thread tension reference value is indicated on the button.
When the button is pressed, the reference value of the thread tension can be set.
During the setting procedure, the thread tension reference value is indicated on
edit data display
Q .
The thread tension value is increased/decreased in increments of 1 using PLUS
button
R or MINUS button S .
The thread tension can be changed even during sewing.