– 21 –
(3) Adjusting the intermediate position of the
pocket setting plate
The intermediate position of the pocket setting plate
can be adjusted.
<Adjustment procedure>
1) Press
A
on the sewing screen to lift pock-
et setting plate
❶
. Press
B
to change the
mode from the automatic mode to the step mode
(
).
2) Press the start button to lower pocket setting plate
❶
to its intermediate position.
3) Loosen four screws
❷
to remove cover
❸
.
4) Loosen intermediate position sensor
❹
and move
it.
5) Press
A
to lower pocket setting plate
❶
from
its upper end to its intermediate position. Check the
intermediate position.
6) Tighten intermediate position sensor
❹
. Install
cover
❸
and tighten four screws
❷
.
7) Cancel the step mode and change to the automatic
mode.
A
B
❸
❷
❶
❹
