– 39 –
In prior to the driving of the machine, check that the work clamp pattern matches the sewing pattern.
③
Carry out sewing.
The sewing shape is displayed at the center of the screen. The cur-
rent point, sewing start position and sewing end position are respec-
tively represented by (pink circle), (blue dot) and (pink dot).
Check the sewing shape using ONE-STITCH BACKWARD
button
C
and ONE-STITCH FORWARD button
D
.
If two or more commands including the thread trimming com-
mend have been entered, the feed will not move when the ONE-
STITCH BACKWARD/FORWARD button is pressed, but the com-
mand shown on the command display A will be changed over.
When you keep pressing the ONE-STITCH FORWARD or
BACKWARD button, the moving speed increases.
When the COMMAND SEARCH FORWARD button
E
is
pressed, the feed automatically moves to the sewing end posi-
tion. When the COMMAND SEARCH BACKWARD button
F
is pressed, the feed automatically moves to the sewing start
position.
To stop the feed, press button
C
,
D
,
E
,
F
,
G
or
H
.
When PRESSER PLATE INITIAL POSITION button
H
is
pressed, the presser plate moves to the sewing start position.
When the PRESSER DOWN button
G
is pressed, the
presser plunger goes up or comes down.
④
Finish the pattern confirmation.
When CANCEL button
I
is pressed, the presser plate moves to the standby position and the
screen is returned to the sewing screen. When START button
J
is pressed, the screen is
returned to the sewing screen and the sewing machine starts sewing from the current confirmation
position.
②
Display the step sewing screen.
When STEP SEWING button
B
is pressed, the step sew-
ing screen is displayed
When the step sewing screen is displayed, the presser
plate comes down. Take care not to allow your fingers to
be caught under the presser plate.
①
Display the sewing screen.
Display the data input screen (blue) and press READY key
A
. Then the back-light of LCD changes to green and sewing is
possible. At this time, the presser plate moves to the intermedi-
ate standby position after the origin retrieval (*1).
(*1) When you press the set ready key after having turned ON the
power to the machine, the origin retrieval is carried out and the
machine enters the sewing mode. Once this sequence is com-
pleted, the machine will not carry out the origin retrieval when it
subsequently enters the sewing mode.
WARNING :
Be sure to check the pattern shape after the pattern selection or the pattern changing. If the pattern
goes out of the pattern slit in the presser plate, the needle can interfere with the presser plate during
sewing, incurring danger such as needle breakage.
2-7. Pattern checking procedure
A
B
I
A
C
H
D
G
E
F
J
Step sewing screen
