– 49 –
The sewing products stacked by the stacker can be taken out.
①
Release the stacker presser of the stacker.
When MATERIAL RELEASE button
A
is pressed on
the sewing screen, the stacker presser of the stacker opens
to allow the sewing product in the stacker to be taken out.
At the same time, the stacker release screen is displayed.
②
Return the stacker presser of the stacker
When the CANCEL button
B
is pressed, the screen is
closed and the stacker presser of the stacker returns to its
home position.
Sewing cannot be started while the stacker release screen
is displayed.
A
B
Stacker release screen
Sewing screen
(1) Taking out the material from the stacker
(2) Adjusting the stack-full sensor
The stacker of this device is provided with the function that detects the stacking height of sewing prod-
ucts stacked on the cloth stacking board and stops the operation of the device.
1) When sensor
❷
installed on work clamp
cylinder
❶
detects that the height of the
stacked products reaches the limit, the
stack-full error "E099" is displayed on the
operation panel. After that, the START
switch is disabled.
To reset, press the RESET button
A
on the error screen.
❷
❶
2-14. Stacker operation (taking out the material)
A
