– 30 –
1. Confirm the pattern shape before sewing. Should the pattern protrude from the
presser plate, needle interferes with the presser plate during sewing, and there is a
danger of needle breakage or the like.
2. When the presser plate is at its upper position, it moves after coming down. Take
care not to allow your fingers to be caught under the presser plate.
3. When turning OFF the power without pressing READY key
, the set value of
"Pattern No.", "Max. sewing speed" or "Thread tension" is not stored in memory.
4. Do not turn the power off while the data is being written. If you turn the power off,
the data in storage can be lost and the selected pattern number can be lost.
①
Turn ON the power switch
When the power is turned ON first, the language selection
screen is displayed. Set the language you use. (It is possible
to change with Memory switch
.)
When ending the selection screen with CANCEL button
or ENTER button
without performing the
language selection, the language selection screen is
displayed whenever the power is turned ON.
②
Select the pattern No. you desire to sew.
When the power is turned ON, the data input screen is dis-
played. If pattern select button
A
which indicates the shape
which is currently selected is shown on the center section of
the screen, you can select the sewing pattern by pressing the
button. Refer to
-2-6. How to select the sewing pattern"
for how to select the sewing pattern.
When READY key
B
is pressed, the back color of LCD
display is changed to green, and the sewing machine is set to
the sewing possible state.
2-3. Basic operation of IP-420
A
B
③
Start sewing.
-2-4. Liquid crystal display at the
