JUKI AP-874/IP-420 Instruction Manual Download Page 37

Page: 37 / 120

– 33 –

(2) Sewing screen

Button and display

Description

AUTOMATIC/STEP setting

Operation mode is changed over among the automatic and step every time this
button is pressed.

→ Refer to

“II-2-10. Setting the AUTOMATIC/STEP” p.43.

STACKER presser button

When this button is pressed, the stacker presser lever will be released and the
stacker release screen is displayed. In the case the stacker operation is disabled
by means of the memory switch

, the stacker presser button will not be

displayed.

→ Refer to

“II-2-14. Stacker operation (taking out the material)” p.49.

SETTING POSITION
CHANGE button

The setting position change screen is displayed.

→ Refer to

“II-2-11. How to change the setting position” p.44

PRESSER DOWN button

The presser arm, presser plate presser plunger come down, and the presser
down screen is displayed.

→ Refer to

“II-2-13. Lowering the presser” p.48.

Summary of Contents for AP-874/IP-420

























































































































Search results

Summary of Contents for AP-874/IP-420

Reviews:

Related manuals for AP-874/IP-420

Brands by name

Popular brands

JUKI AP-874/IP-420, Instruction Manual

Search results

Summary of Contents for AP-874/IP-420

Reviews:

Related manuals for AP-874/IP-420

Brands by name

Popular brands