– 13 –
Use a SCHMETZ 134 SERV 7 Nm : 130 needle
1) Turn handwheel
❶
to lift needle bar
❷
to its high-
est position.
2) Loosen needle setscrew
❸
and turn needle
❹
so
that its indentation
A
is on the handwheel side.
3) Push the needle deeply into the hole in the needle
bar, in the direction of the arrow, until it hits the sur-
face at the far end of the hole.
4) Tighten the needle setscrew very tightly.
5) Check to make sure that long groove
B
of the nee-
dle is on the face plate side.
4. OPERATION
WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of the
sewing machine
4-1. How to install the needle
❶
❷
❸
❹
❸
A
B
