JUKI AC-172N-1790, Instruction Manual

Page: 84 / 102

− 80 −
(2) Level 2
☆ Press MODE swtch for as long as three seconds and t s possble to edt.
No. Item Setting range Edit unit Initial value
K02 Parameter setting change Permitted/Prohibited
Prohbton of change of sewng data and memory swtch
data s set.
– – Change
permtted
: Change
permitted
: Change
prohibited
K03 Function of prohibition of selection of kind of presser
Permitted/Prohibited
Prohbton of change of U14 Knd of presser s set.
: Change
permitted
: Change
prohibited
– – Change
permtted
K04 Sewing shape selection level
Number of sewng shapes whch can be sewn can be
ncreased. (Max. 30 shapes)
: 12
shapes
: 20
shapes
: 30
shapes
– – 12 shapes
K05 Cloth cutting knife power
Output power of cloth cuttng knfe s set.
0 : Mn. power
/
3 : Max. power
0 to 3 1 1
K06 Selection of machine type
Type of sewng machne head s set.
0 : Standard type 1 : Dry head type
0 to 1 1 0 (Standard
type)
K07 Max. speed limitation speed setting
Max. speed of sewng machne can be lmted.
When K06 Selecton of machne type s set to
dry head type, max. speed s automatcally lm-
ted to 3,300 st/mn.
400 to 4200 100st/mn 3600st/mn
K08 Compensation of unsteady needle thread
tension
Output value of needle thread tenson s wholly
offset and compensated.
–30 to 30 1 0
K09 Output time of needle thread tension changed value
When data related to needle thread tenson s changed,
the changed value s output as long as the set-up tme.
: Without
output
: Output of
set-up time
0 to 20 1s 0s
K10 Function of origin retrieval each time
Orgn retreval s performed after completon of sewng
or completon of cycle.
: Without
: After end
of sewing
: After end
of cycle
– – Wthout
K11 Needle up by reverse run Permitted/Prohibited
When U01 Presser lfter maxmum poston s set to 14.0 mm
or more, moton of needle up by reverse run s automatcally
performed and the machne stops. Prohbton of the moton
can be set.
: Needle up by
reverse run
prohibited
: Needle up by
reverse run
permitted
– – Permtted
K12 Knife solenoid lowering time setting 25 to 100 5ms 35
K13 Knife solenoid lifting time setting 5 to 100 5ms 15