– 37 –
150mm
1
150mm 150mm 150mm
85mm
200mm
2
3
5
4
6
7
8
9
(3) Adjusting the sub-clamp pressure
Measure the pressure of the sub-clamp
and adjust t properly.
1) Drll holes
1
to
6
n a garment body
accordng to the dmensons shown
in the figure. Place the garment
body on the sewng machne so that
the sx holes are on the same axes
wth the sub-clamps.
2) Turn the power ON. Press Ready key
7
to
actvate K55
8
adjuster adjustment mode. (Re-
fer to
"1-4. Preparation of the device"
n the
SET-UP MANUAL
for the adjuster adjustment
mode.)
3) Press solenod valve swtch 8
9
to clamp the
garment body wth the sub-clamps.
4) Whle the sub-clamps are clampng the garment
body, put a sprng balance onto the garment
body to measure the pressure appled by the
sub-clamps when the garment body starts to be
fed. (Standard value: 700 g - 1500 g)
5) Adjust the sub-clamp pressure referrng to the
adjustment of the presser plate.
