– 40 –
For the operatng procedure of start and workpece sucton, operate n accordance wth the type selected
n "Start swtch selecton" of the memory swtch data
.
[Operatng the A-mode (the knee swtch s used to start sewng)]
1) Press READY key
on the operaton panel to make the ready ON state.(State that the screen s
green)
2) Properly set the material on the preset board. (See the figure below.)
3) When knee swtch
3
s pressed, the materal wll be sucked (workpece sucton lamp
5
lghts up).
When t released, the machne wll start runnng.
* When the materal s sucked (workpece sucton lamp
5
lghts up), press hand swtch
4
and the workpece
sucton mechansm s released (workpece sucton lamp
5
goes off). Then the start s released.
* If you repeat steps 2) and 3) durng sewng the 1st workpece, contnuous operaton can be performed.
[Operatng the B-mode (the hands swtch used to start sewng)]
1) Press READY key
on the operaton panel to make the ready ON state.(State that the screen s
green)
2) Properly set the material on the preset board. (See the figure below.)
3) When knee swtch
3
s pressed, the materal wll be sucked and s held sucked even when t s released.
4) Press and release hand swtch
4
, the sewng machne starts sewng. (Workpece sucton lamp
5
lghts
up.)
* If knee swtch
3
s pressed when the materal s sucked, the workpece sucton s stopped.
* If you repeat steps 2) to 4) whle the frst materal s beng sewng, the sewng machne s capable of
performng contnuous operaton.
※ The mode has been factory-set to [A mode] at the time of shipment.
The proper materal settng
1) Men’s shrts
Place the materal so that there s no clear-
ance between the sde end of the materal
and presettng board
A
, and algn the top
end of the materal wth marker
B
.
2) Lades’ shrts
Place the materal so that there s no clear-
ance between the sde end of the materal
and presettng board
A
, and algn the top
end of the materal wth maker
C
.
When the swtch s pressed, the followng seres of operaton wll be performed automatcally
[Seres of the operaton for men’s wear]
Start
The preset board moves forward and
feeds the materal on the carrage.
Buttonhole
sewng
Index n the rght drecton
(the carrage moves)
Buttonhole
sewng
Index n the
rght drecton
Buttonhole
sewng
The conveyer returns to ts
home poston
Stackng
[Seres of operaton for lades' wear]
Start
The preset board moves forward and
feeds the materal on the carrage.
Buttonhole
sewng
Index n the left drecton
(the carrage move)
The carrage travels to ts
rghtmost poston
Index n the
rght drecton
Buttonhole
sewng
The conveyer returns to ts
home poston
Stackng
Top end of
the material
Side end of
the material
Ladies’ shirts
Men’s shirts
Top end of the
material
A
B
A
C
Side end of the
material
