− 57 −
(1) Setting procedure of the presser type
2-1. Input of the presser type
1
Call the presser type setting parameter.
When the back-light of LCD display
1
shows
the input mode in blue color, it is possible to
change the pattern. When the back-light shows
the sewing mode in green color, press READY
key
2
to change over to the input mode.
2
Select the presser type.
Press MODE key
4
to display Memory
switch data (level 1) edit screen
A
. Press ITEM
SELECT key
!0
to call
Type
of presser foot. Then, press DATA CHANGE
key
!1
. The pictograph is displayed
as shown in the figure below. Select the type of
the work clamp check installed on the sewing
machine referring to
Type 1 Type 2
Type 3 Type 5※
2. OPERATING AND OPERATION SETTING METHODS FOR DISCRETE SEWING MACHINE
A
!0
!1
2
4
