− 64 −
Ths sewng machne has been set so as not to be capable of edtng sewng data tems whch are less
frequently used at the tme of your purchase. When you desre to set the data more closely n accordance
wth the sewng products, set the sewng data tem to the edt possble state and use the machne.
* For the settng of sewng data wth/wthout edt, when S52, rght parallel secton tenson s set to wthout
edt, sewng s performed wth the data of S51 left parallel secton tenson. When S56, 2nd bar-tackng
tenson s set to wthout edt, sewng s performed wth the data of S55, 1st bar-tackng secton.
When the sewng data tems other than the above ones are set to wthout edt, the data to be referred
are the ntal value data.
2-8. Method of setting sewing data with/without edit
A
B
C
2
8
C
1
1
3
(With edit)
(Without edit)
!0
!1
1
Set the mode to the input mode.
When the back-lght of LCD dsplay
1
shows
the nput mode n blue color, t s possble to set.
When the back-lght shows the sewng mode
n green color, press READY key
2
to
change over to the nput mode.
2
Call sewing data with/without edit change
-
over screen.
Press DATA key
8
for as long as three
seconds, and data wth/wthout edt changeover
screen
A
or
B
s dsplayed.
3
Select sewing data you desire to change
over.
Press ITEM SELECTION key
!0
, and
select sewng data tem
C
you desre to change
over.
At ths tme, changeover possble tem only can
be selected.
4
Changeover of with/without edit
Press DATA CHANGE key
!1
, and
pctograph dsplay
C
of sewng data repeats
reverse/non-reverse.
Non-reverse dsplay : Wth edt
Reverse dsplay : Wthout edt
Return to step
3
, and plural sewng data tems
can be changed over.
5
Save data which have been set.
Press READY key
2
, and the data n the
state of beng changed over can be saved. After
two seconds, the screen returns to the former
one.
Press RESET key
3
, and the screen re-
turns to the former one wthout savng the data.
