− 60 −
When stop swtch
A
s pressed durng sewng op-
eraton, the sewng machne nterrupts sewng and
stops. At ths tme, error dsplay screen
B
s dsplayed
to nform that the stop swtch s pressed.
[To continue performing sewing from some point
in sewing]
Sewng moton stop status
Error dsplay screen
B
s dsplayed.
1
Release the error.
Press RESET key
3
to release the error.
Then step moton screen
C
s dsplayed.
2
Return the presser.
Press BACKWARD key
@6
and the press-
er returns sttch by sttch.
Press FORWARD key
@5
and the presser
advances sttch by sttch. Return the presser to
the re-sewng poston.
3
Start sewing again.
When you press the knee swtch or hand swtch
(whch s preset as the start swtch), the sewng
machne re-starts sewng.
[To perform re-sewing from the start]
Sewng moton stop status
Error dsplay screen
B
s dsplayed.
1
Release the error.
Press RESET key
3
to release the error.
Then step moton screen
C
s dsplayed.
2
Return the presser to the sewing product
setting position.
Press agan RESET key
3
and the press-
er returns to the sewng product settng poston.
3
Perform again the sewing work from the
start.
* Existing number of stitches/total number of stitches
are displayed in section D.
* Existing sewing command is displayed in section E.
Sewing
command
Jump feed
command
Thread trimmer
command
Knife
command
Error No.
A
2-4. Performing re-sewing
Kinds of commands are :
3
E
C
D
@5
@6
B
Error
pictograph
