25
25
25
25
The travel adjust range is from 0-150% (0 degrees to 60 degrees) from neutral
and it can be adjusted for each direction individually. The factory default (data
reset) value is 100% for each direction of servo travel.
Elevator to Flap Mix
Elevator to flap mixing is used to provide a quicker pitch response on the model.
The general usage is to have up elevator/down flaps and down elevator/up flaps.
The flap travel is independently adjustable for both directions.
Depending on the flight mode switch set-up in the device menu the mix can be
activated using the Aileron, Elevator and Rudder dual rate switches, or the flight
mode switch. The mix can also be activated using the throttle stick through the
THRO STK function that defines an activation point on the throttle travel.
Aileron to Rudder Mix
Mixing aileron to rudder gives a more balanced turn by automatically giving the
correct rudder action for a balanced turn.
Depending on the flight mode switch set-up in the device menu, the mix can be
activated using the Aileron, Elevator and Rudder dual rate switches, or the flight
mode switch. The mix can also be activated using the throttle stick using the
THRO STK function which defines an activation point on the throttle travel.
