9
99
9
Device Select
A new feature of the PCM-9
X
is the
device select
menu. From here you can
assign functions to a switch to allow you to tailor the layout of your transmitter
to your own personal taste.
The device select menu also allows you to activate the extra flight modes.
Use the scroll button to highlight a function (top line) and then depress the button
to bring up the assign menu where you can then select the desired switch to assign
the function to.
The bottom line shows other functions for the various switches. The default shows
that the switch is active (ACT) in its usual function. If the cursor is placed over the
ACT symbol and the scroll bar is pressed then a menu of other options is displayed
such as GYRO (for switching gyro gain) and SYS. (for selecting the Flap System).
When using an
aero
model memory, to allow you to use features such as
dual
aileron, rudder, elevator, flap and engine you need to
inhibit
(INH) an auxiliary
channel within the
device select
menu to allow it to be available in the
wing type
menu. Once available in the
wing type
menu it can be assigned as the
mate
(slave)
of the master channel.
Wing Type (Aero & Glider)
The purpose of Wing Mixing or Wing Type Function is to eliminate
mechanical or programmable mixes that would otherwise be necessary for the
proper flight of certain styles of aircraft. Flaperon, elevon (delta) and V tail
configurations are available in aero mode and flaperon (Dual Flap) and V tail
are available in glider mode. Each of the wing type selections will be covered
in a separate section.
Normal Wing Type Selection
This is the first wing type selection that appears on your LCD display. Use this
wing type with common aircraft that utilize only one servo for both ailerons.
Flaperon Wing Type Selection
Flaperon allows you to use the existing ailerons as flaps. The ailerons can be
raised or lowered in unison as flaps, yet still remain fully operational as the
ailerons of your R/C aircraft.
