27
27
27
27
The Snap Roll Switch affects the aileron, elevator and rudder only; all other
functions work normally. While the snap roll switch is activated, the related
sticks will not operate until the switch is released. When this function is
inhibited, the display will show INH and the snap roll system will not operate.
Individual adjustment is available for each control surface in either direction.
Flap System (Flap Travel Adjust)
To switch on the flap system you need to use
device select
in the
system menu
to swap the Flap switch from ACT to SYS.
Dual flap
also needs to be activated in
the
system menu
.
The 3-position flight mode switch activates the flaps. The Flap System is used to
set the travel adjustment for the flap servo(s) from 0% to 125% up or down. The
flap position can be individually set for each flap switch position. In addition a
corresponding compensating elevator adjustment can be set.
Alternatively this function can be activated automatically depending on the position
of the throttle stick.
When the automatic system is enabled you may also choose a delay before it
activates. This is located in the bottom right hand side of the screen.
