6
66
6
Model Select & Copy
The PCM9X transmitter employs a memory function, which memorises data
for up to 20 individual aircraft. To avoid using incorrect model memories, it is
recommended that you enter a unique name for each aircraft. Press the ENT
key and turn the power switch ON to access the System Set-Up Mode.
The Copy Function enables you to copy all of the settings of your current
model to another memory (model number) within the same transmitter. This is
very useful when setting up one aircraft several different ways.
Model Name
This function is used to input model names individually. Each model’s name is
displayed in the normal screen automatically when that model is selected. To
avoid confusing models, inputting model names is recommended. You can
input a maximum of 8 characters for each model name. In the System Set-Up
Mode, select the Model Name Function using the scroll bar. Once selected,
press the scroll bar to access.
Type Select
The PCM9X is capable of performing as a helicopter, airplane or glider radio
with full functions for each. It can also memorize data for 20 models
individually.
Note:
If the power switch is turned OFF immediately after selecting the new model type, the
change will not be saved.
To change and save the model type use the scroll bat to select the GLID,
ACRO or HELI. Press the scroll bar. At this time, existing model data is
replaced by the model type aircraft data selected. Be sure to confirm the model
name to prevent accidental loss of your important data. To cancel this
function, return to former model type or turn the power switch OFF.
Note:
When you an alternative model type on this transmitter the allocation of lever
switches, etc., will also change. Please refer to the appropriate section of this instruction
manual for their functions.
In the System Set-Up Mode, select the Type Select Function using the scroll
bar. Once selected, press the scroll bar to access.
Data Reset
The Data Reset Function allows you to reset all the functions and settings for
the current model to the factory pre-set conditions. Resetting does not affect
the data already programmed for other models. Be sure to confirm that you
need to reset the data of the currently indicated model in order to prevent
accidental loss of valuable data.
To access Data Reset, select Model Reset in System Set-Up and press the scroll
bar.
