JS1 Jet Sustainer Flight Manual Supplement - Issue 1
Date of issue: 31.03.2016
Accepted section
Page 5–26
5.1.2. RPM
RPM is displayed in the center of the screen. A needle indicates the
RPM on an analogue scale and the numeric value is also indicated in
the center. The limitations and colour convention is given in the
following table.
Speed range
RPM
Colour of bar
Normal range
30 000 to 97 000
Green
Over-speed
Above 97 000
Red
Table 5-2: RPM limitations display
5.1.3. Throttle setting
The throttle setting is indicated by the light grey arc on the outside of
the RPM bar. The desired throttle setting is adjusted by rotating the
Jet Thrust Dial.
5.1.4. EGT
Exhaust gas temperature is displayed in analogue format on the right
hand side of the screen, and the numeric value in degrees Celsius is
displayed in the top right corner. The limitations and colour convention
are given in Table 5-3.
