JS1 Jet Sustainer Flight Manual Supplement - Issue 1
Date of issue: 31.03.2016
Accepted section
Page 8–7
8.5.2.5.
Fuel level calibration
Fuel probe calibration is done via the “Fuel
Probe Cal” screen. A 10-bit digital value
displayed in brackets (692d) represents
the measured fuel level from the fuel
probe (0 is empty, 1024 is full).
When rotating the Thrust Control Dial, the d-value is updated from the
fuel probe.
Calibration of the fuel probe is explained in the Jet Maintenance
Manual and must be completed by an approved person.
NOTE
:
The fuel probe value is only measured if the “Quantity
Determination” in the “Fuel Configuration” page is set to
“Probe” or “Probe and Calculation”.
