JS1 Jet Sustainer Flight Manual Supplement - Issue 1
Date of issue: 31.03.2016
Accepted section
Page 4–13
4.6. In-flight operating procedures
4.6.1. Inflight start procedure
The inflight start procedure is as follows:
1. Ensure fuel shut off valve, positioned on the left hand side of the
cockpit, is in the “OPEN” (forward) position.
2. Move the Jet Master Switch on the JDU to the “ON” position.
3. Maintain a safe airspeed: 100km/h (54 kts) to 120km/h (65 kts).
4. Move the Jet Control Switch to the “RUN” position.
5. After a successful start-up, the engine will spool up to a pre-set
condition. (IDLE setting is the factory default)
6. After the RPM has stabilised at idle (30 000 RPM), the thrust can
be adjusted using the “Thrust Control Dial”.
