MNP37M03GBV00 Date: 24-11 Rev. 0
Page 71 of 79
Safety time periods.
There are two safety time periods to prevent incorrect product programming:
1.
You cannot dispense a product that is dispensed with water unless the
solenoid valve for that dispenser is enabled.
2.
You cannot under any circumstances finish dispensing a product unless the
solenoid valve is enabled after this.
3.
For a product that is dispensed dry, before enabling the solenoid valve you
need to enable the relevant dispenser.
4.
You cannot enable 2 solenoid valves at the same time.
If these minimum prerequisites are not met, the machine will display the message
INCORRECT SALE.
Warnings:
-
Safety time periods are dispensed from a PC. (Option 31).
-
Products dispensed wet: Milk, Chocolate, Tea, Mint Tea, etc.
-
Products dispensed dry: Decaffeinated coffee.
-
The motors are programmed by Time and the solenoid valves by Pulses of the
volume counter.
In this programming option you can only modify the doses injected by the machine
through the PC program or a programming card and card reader. To add a new product
that has not been determined you will need to carry out operations with a coffee maker
configuration program (in a PC) and then transfer the data to the machine.
Programming address 31 “Machine programming”.
Press the OK key to access the programming address. There are two different working
options.
Viewing mode.
To view the product dose press the selection key for the desired product. The display
will show the product and start time, the time when the element begins to move,. Time 0
is when the moving arm is in position.
DISPENSER X
START XX ds
Press the OK key and the display will change and show the time during which the
element is enabled in tenths of a second.
Press key 4 to change the element you wish to view, solenoid valve or beater.
Execute mode.
To view the product dose press the selection key for the desired product. The display
will show the product and start time.
DISPENSER X
DOSE
XX ds
To increase or decrease the start time, press keys 1 or 2 respectively.
