MNP37M03GBV00 Date: 24-11 Rev. 0
Page 58 of 79
10.- Products that can be dispensed from the machine
The Coffeemar coffee machines can dispense a wide range of products. They can
dispense up to 31 different, fully user configurable products using two different methods.
-
Through a PC program and then transferring the data to the
machine through address 30
-
On site through the Machine. (Address 34).
The G-500 model can dispense up to 18 different products at the same time through its
18 selection keys, although the machine can have up to 24 different products
programmed. These products can be modified the construction of the products in
programming option 34 “PRODUCT DOSE PROGRAMMING”.
S e l e c
z u c a r
R e c u p .
T E C L A S D E
T E C L A S D E
S E L E C C I O N D E
S E L E C C I O N D E
P R O D U C T O S
P R O D U C T O S
The products can be assigned to the selection keys through programming address 23,
and the same product can be assigned to several keys, or keys can be left without
being assigned any product.
11. - Programming mode
To enter and exit programming mode and to access the various programming options,
press the button located at the back of the door of the machine at the height of the coin
slot. Press once to enter the initial programming menu, where you will see the text
“PROGRAMMING ADDRESSES”, in this option you can get a ticket from the machine,
communicate with the machine via RS232 or access communication through the infra-
red port. to access the programming options themselves press the programming button
again or press the sugar selection key.
11.1. - Programming options
For all programming options and to enter programming level codes you need to
understand how the keypad works in programming mode:
-
The key pad in programming mode behaves like the key pad of a calculator, as
shown in figure 1.
