SECTION 6 - GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
6-6
3121783
NOTE:
When adding or replacing hydraulic oil only use JLG
approved hydraulic oil. Do not mix oils unless directed
by JLG.
Recommended Gearbox Oils
600 XP 150
EP 150
Blasia 150
Spartan EP150
Engine Oil
SAE 10W30
Greasing and Lubrication
Recommended lubricants
Contact Grease EP (blue in color) is used to grease the turn-
table and cylinder pins on the chassis
GR MU EP1 Grease is used to grease the expansion guide of
the chassis, the track tension valve, and basket support pins
White EP NLGI 2 Grease is used on the boom extensions
Either MU EP1 or Esso Beacon EP2 is used to grease the cou-
pler and belt tensioner
Greasing Locations (See Figure 6-1.)
NOTE:
Use a brush to spread grease onto telescopic boom
wear pad areas.
Table 6-9. Hydraulic Oil Specifications
Hydraulic System
Operating
Temperature Range
Viscosity
Grade
14deg F (-10 deg C) and
104deg F (+40deg C)
ISO VG 46
14deg F (-10 deg C) or
above 104deg F (+40deg C)
ISO 68
To
order
go
to
Discount-Equipment.com
