SECTION 3 - MACHINE CONTROLS, INDICATORS AND OPERATION
3121783
3-11
3.2
PLATFORM CONTROL STATION
The platform control station is connected to the machine at
the platform using a flexible cable.
NOTE:
Before removing or connecting the flex cable, the
machine must be turned OFF.
Installing the Platform Control Station
1.
Connect the flexible control cable at the platform
to the Platform Control Station box connector on
the right side of the control box.
.
2.
In the platform, slide the remote control station
assembly into the storage box and place the rib on
the right side of the control station assembly
under the metal tab attached to the storage box
assembly.
3.
Lower remote control station assembly into the
storage box, ensure the attached flexible cable
slides into the slot also on the right side of the box.
4.
On the left side of the control station secure the
box by turning the handle on the locking tab
clockwise locking the rib of the control station
under the rotating metal tab of the handle assem-
bly.
5.
To remove the control station assembly, reverse
the four steps above.
OL00030
To
order
go
to
Discount-Equipment.com
