SECTION 4 - MACHINE OPERATION
4-10
3121783
If one of the four outrigger lock-
ing pins is lifted or the outrigger
position control microswitch is
not working properly, all move-
ment will be stopped and an
error message will appear on the
platform/remote control LCD
display.
Operation will be possible when the outrigger position lock-
ing pin is properly set and/or the microswitch is in the cor-
rect configuration again.
Check correct positioning of the outrigger lock handle and
two microswitches at each outrigger before every use, as
shown in following illustration.
WHEELS
FAIL
FAIL
FAIL
FAIL
Figure 4-2. Outrigger Positions
1.
Transport Position
2.
Restricted Work Area Position
3.
Full Work Area Position
54
32
To
order
go
to
Discount-Equipment.com
